Events // Course

Introduction to drone flight, photogrammetry, digital scanning and Gaussian splatting

An 8-hour introductory course in one day: drone flight and capture in the morning, photogrammetry and Gaussian splatting in the afternoon. It is a demonstration course for groups of up to 20 people, taught in SEEDS, the studio's production system.

5 // The capture: a valley captured from a drone, from the points to the finished frame.5 // The capture: a valley captured from a drone, from the points to the finished frame.

From the first photograph to a finished 3D model. In one day, on Friday, you see how 3D capture works from start to finish: how a piece is photographed and processed, how a drone is flown safely and how photogrammetry compares with Gaussian splatting.

This course is a sample of how we work in the programmes of the October 2027 intake.

Morning, flight and capture (10:00 to 14:00). An overview of 3D capture techniques (photogrammetry, LiDAR, structured light and Gaussian splatting) with examples from heritage, architecture, design and film; basic regulations, safety, handling and flight planning; a guided flight in daylight to capture an object or a façade, in which each person can take the controls for a few minutes, with an alternative plan if the weather does not allow it; and photogrammetry fundamentals: overlap, angles and lighting.

Afternoon, photogrammetry and Gaussian splatting (14:30 to 18:30). The teachers photograph a piece and process it step by step in SEEDS, in front of the group, from alignment to a clean, textured and exported 3D model; what Gaussian splatting is and its workflow, from capture to viewing; and a comparison of both techniques to see when to use each one and how to export and share the models.

Everything shown in the classroom, from processing the photographs to the textured model and the splat, is done in SEEDS, the production system built by Jimsonweed Studios.

No previous experience in drones, photogrammetry or 3D is needed. It is a demonstration for groups of up to 20 people: the aim is that you understand how each step is done and why. The studio provides the drones and the equipment. You leave knowing how a 3D capture is planned, processed and shared, and with a guide to keep learning.

Friday 5 February, from 10:00 to 14:00 and from 14:30 to 18:30, with half an hour for lunch. Guy Hauldren and Adrián Castro teach it.

One course each day: on Friday, the capture; on Saturday, processing the data up to the final shot. You can take both.

Price: €100. Both courses together: €150, as they complement each other. To take both, register for each one and we apply the joint price.

Registration holds your place. We will email you to confirm it and explain how to pay.

October 2027 intake open: VFX Generalist, CGI Generalist and 3D Animator

Apply for a place →

Programme

Hour by hour.

10:00-10:30Welcome and introduction to digital scanning and 3D capture

Guy Hauldren, Adrián Castro

10:30-11:15Introduction to drone flight: regulations, safety and flight planning

Guy Hauldren, Adrián Castro

11:15-12:30Guided flight in daylight: each person can take the controls for a few minutes

Guy Hauldren, Adrián Castro

12:30-12:45Break

12:45-14:00Photogrammetry fundamentals: overlap, angles and lighting

Guy Hauldren, Adrián Castro

14:00-14:30Lunch

14:30-15:30Capture demonstration: how a piece is photographed

Guy Hauldren, Adrián Castro

15:30-16:45Processing in SEEDS: from alignment to a clean, textured and exported model

Guy Hauldren, Adrián Castro

16:45-17:00Break

17:00-18:00Gaussian splatting: from capture to viewing the result

Guy Hauldren, Adrián Castro

18:00-18:30Photogrammetry or Gaussian splatting: comparison and export

Guy Hauldren, Adrián Castro

Speakers

Who you will hear.

Guy Hauldren ↗

3D Scanning & Creative Technologies Specialist

3D scanning and creative technologies specialist with more than twenty-five years of international production experience. Founder of 2H3D, he has worked at Framestore and at Pinewood Studios. Credits include Harry Potter and the Chamber of Secrets, World War Z and The Dark Knight. Drone pilot.

Adrián Castro ↗

On-set VFX Supervisor, CG, Layout & Matchmove Supervisor

Layout and Matchmove Supervisor with more than fifteen years across leading international studios.

Registration

Hold your place.

Online payment opens soon. Registration holds your place: when payment opens, we email you the link to pay and confirm it.

Your registration for this course includes the visual effects afternoon on Thursday 4 February: there is no need to register for it separately.

Controller: JIMSONWEED, S.L. Purpose: manage your place at this event, issue your invitation and access pass, and contact you about it. Basis: consent. Retention: deleted one year after the event. Rights: contact@jimsonweed.studio. Full Privacy Policy ↗

Talks, screenings and open days.